Laser Cutting and CNC Machining in Cairo
Sheet metal, laser cutting, CNC machining and welding sourced from Abu Rawash, Shaq El Thoban, Badr City and Katameya
CutLinq sources laser cutting, CNC machining, sheet metal bending and welding for Cairo buyers from workshops spread across Abu Rawash, Shaq El Thoban, Badr City and Katameya, matching each order to whichever supplier has the right machine and free capacity. Upload a DXF or STEP file and receive a binding quote within 12 hours, with delivery estimated from the nearest available workshop rather than one fixed address.
This page covers where Cairo's fabrication capacity sits, realistic delivery windows across the city, and how Cairo's dust and heat should influence material and finish choices for outdoor or exposed parts.
Where Cairo's fabrication capacity sits
Abu Rawash and Shaq El Thoban host a dense concentration of sheet metal, laser cutting and welding workshops serving Greater Cairo's contractors and workshop owners, with fast turnaround on small to medium batches. Badr City, further east, has larger CNC machining and fabrication plants working for OEM and industrial clients, generally better suited to production runs and machined parts needing 4 to 8 working days. Katameya and the New Cairo industrial pockets serve fit-out, signage and smaller specialised jobs. CutLinq spreads orders across these areas so a single busy workshop does not become a bottleneck for your delivery date.
Delivery times across Cairo and beyond
Parts collected from an Abu Rawash or Shaq El Thoban workshop typically reach anywhere in Greater Cairo the same or next working day by courier for small items, and 1 to 2 days for palletised loads. Badr City deliveries to central and east Cairo add half a day on typical courier routes. Orders to Alexandria or the Delta usually add 1 working day; orders to the Gulf are quoted separately with freight time added on top of production.
| Order type | Within Greater Cairo | To Alexandria/Delta | Typical production time |
|---|---|---|---|
| Small laser-cut parts, courier | Same day to next day | 1 to 2 days | 1 to 3 working days |
| Bent or welded assemblies, pallet | 1 to 2 days | 2 to 3 days | 3 to 6 working days |
| CNC machined parts, small batch | 1 to 2 days | 2 to 3 days | 4 to 8 working days |
| Powder coated or anodised parts | 2 to 3 days | 3 to 4 days | 6 to 10 working days |
Dust, heat and material choice
Cairo's fine desert dust settles into any moving mechanism and accelerates wear on unsealed bearings and slides, so enclosures for outdoor or rooftop equipment should specify IP54 or better sealing and drainage holes at the lowest point. Summer surface temperatures on dark powder-coated steel can exceed 70 °C, which matters for gasket selection and for thermal expansion gaps on long duct runs or facade panels; allow roughly 12 µm per m per °C for steel and 23 µm per m per °C for aluminium. Standard S235JR mild steel and 304 stainless cover most inland Cairo applications; galvanised steel or 316L is worth the extra cost only for parts with direct water exposure or heavy washdown.
| Condition | Recommended material | Reason | Note |
|---|---|---|---|
| Outdoor rooftop enclosure | Galvanised steel or 304 stainless | Dust and occasional rain ingress | Seal to IP54, drainage holes 6 mm |
| Indoor panel or bracket | S235JR mild steel | No corrosion driver | Standard powder coat sufficient |
| Long facade or duct run | Aluminium 5754 or galvanised steel | Manage thermal expansion | Allow expansion joints every few metres |
| Washdown or food-adjacent area | 304 or 316L stainless | Regular cleaning chemicals | 316L if chlorine-based cleaners used |
What to send for a fast quote
A DXF file with material and thickness noted is enough to quote laser-cut sheet metal parts. For machined, bent or welded assemblies, send a STEP file with a PDF drawing showing critical dimensions, tolerances and any surface finish requirement. Mention your delivery area within Cairo (or elsewhere) so we route the job to the closest supplier with capacity and give an accurate delivery estimate; WhatsApp support is available for quick clarifications on file readiness or material substitutions.
Design tips
- Specify IP54 sealing and 6 mm drainage holes at the lowest point of any outdoor or rooftop enclosure to manage dust and occasional rain.
- Allow thermal expansion gaps of roughly 12 µm per m per °C for steel and 23 µm per m per °C for aluminium on long facade or duct assemblies.
- Use galvanised steel or 304 stainless rather than bare mild steel for any part exposed to regular washdown.
- Round exposed edges to at least 0.5 mm radius on parts handled outdoors to reduce paint chip-off in dusty conditions.
- Call out the powder coat colour by RAL code and confirm gloss level; dark RAL colours run hotter on rooftop equipment in Cairo summers.
- Send your delivery district with the RFQ so lead time reflects the nearest supplier, not a citywide average.
Applications
| Industry | Example parts | Typical material |
|---|---|---|
| Construction and contracting | Structural brackets, staircases, railings | S235JR, S355J2 |
| HVAC contractors | Ducting, plenum boxes, hangers | Galvanised DX51D+Z |
| Signage and fit-out (Katameya) | Facade letters, shop fronts | Aluminium, stainless |
| OEM and machinery (Badr City) | Machined brackets, housings | S235JR, 6061-T6 aluminium |
| Food and pharma | Process frames, guards | 304 or 316L stainless |
| Electrical contracting | Panel enclosures, busbar supports | Mild steel, Cu-ETP |
| Automotive aftermarket | Brackets, jigs | S235JR, 6061-T6 |
Pricing and lead time
Pricing follows the same three drivers everywhere: material and grade, process time (bending, welding and machining add labour beyond a straight laser cut), and finishing such as galvanising, powder coating or anodising, which typically add 2 to 4 working days. Simple laser-cut parts from Abu Rawash or Shaq El Thoban workshops ship in 1 to 3 working days; machined parts from Badr City plants and finished assemblies run 4 to 10 working days depending on complexity and coating.
Frequently asked questions
Whichever of Abu Rawash, Shaq El Thoban, Badr City or Katameya has an available supplier with the right machine for your part. We tell you the estimated delivery time based on that location once the order is confirmed.
Upload your DXF or STEP file and receive a binding quote within 12 hours from suppliers across Cairo.