Metal Fabrication in 10th of Ramadan City
Laser cutting, CNC machining, bending and welding for factories in zones A1-A6, B1-B4 and C
10th of Ramadan City is one of the largest industrial cities in Egypt, hosting food, pharmaceutical, plastics, textile and engineering plants across the A1-A6, B1-B4 and C zones. Factories here regularly need laser-cut brackets, machine guards, spare parts and stainless steel process equipment on short notice, and often outside the capacity of their own maintenance workshop. CutLinq connects these factories to a network of laser cutting, CNC machining, bending and welding suppliers across Greater Cairo: upload a DXF or STEP file and receive a binding quote within 12 hours.
This page covers typical demand from the city's industrial base, delivery times into the different zones, and what to send for a fast quote on a spare part or a production batch.
What factories in 10th of Ramadan order most
Food and pharmaceutical plants order 1.4301 (304) and 1.4404 (316L) stainless brackets, guards, hoppers and conveyor parts because production lines cannot stop for long when a part fails. Plastics and packaging factories order replacement gears, shafts, sprockets and machine frames in S235JR and 6061-T6. Engineering and automotive parts suppliers in zone B order CNC-machined components to drawing, often in small batches of 5 to 50 pieces with tight tolerance.
Because many factories run multiple shifts, a broken guard or bracket is usually an urgent order: same-day DXF upload with next-day delivery to A or B zones is the common pattern, rather than planned procurement weeks in advance.
| Sector | Common order | Typical material | Usual turnaround |
|---|---|---|---|
| Food and beverage | Hoppers, guide rails, conveyor brackets | 1.4301 (304) | 2-4 working days |
| Pharmaceutical | Enclosure panels, cart frames | 1.4404 (316L), S235JR | 3-5 working days |
| Plastics and packaging | Gears, shafts, machine frames | S235JR, 6061-T6 | 3-6 working days |
| Textile | Brackets, guide rollers, guards | S235JR, DX51D+Z | 2-4 working days |
| Automotive supply | Machined jig components | S235JR, 6061-T6 | 4-7 working days |
Delivery times across zones
Zones A1 to A6 are closest to the main road links and typically receive small parts (under 30 kg) the next working day after cutting is finished, once collected from a Cairo or 6th of October workshop. Zones B1 to B4 and the C zone add roughly half a day due to internal road distance and factory security checks; pallet loads generally arrive within 1 to 2 working days of dispatch. Urgent single parts can move same day if the file is confirmed before mid-morning, coordinated over WhatsApp with the workshop dispatcher.
| Zone group | Small part (under 30 kg) | Pallet load | Notes |
|---|---|---|---|
| A1-A6 | next working day | 1-2 working days | closest to main highway access |
| B1-B4 | next to 2 working days | 2 working days | internal factory access adds time |
| C zone | 1-2 working days | 2 working days | coordinate gate access in advance |
Materials and finishes commonly stocked for this route
S235JR sheet from 1 to 12 mm, 1.4301 (304) and 1.4404 (316L) from 1 to 6 mm, and DX51D+Z galvanised sheet are held by workshops serving the 10th of Ramadan route, covering most maintenance and OEM spare part requests without a material lead time. 6061-T6 aluminium plate and extrusion are also on hand for lightweight guards and brackets. Powder coating in stocked RAL colours adds 2 to 4 working days; anodising and hot-dip galvanising add 3 to 5 working days and are usually sent to a subcontractor in Cairo or 6th of October.
What to send for a fast quote
For a like-for-like spare part, a photo with a tape measure against the part plus the material and thickness is often enough for a first estimate, but a DXF or STEP file is needed for the binding quote and for accurate laser or CNC programming. For machined parts, include the ISO 2768 tolerance class and any critical dimensions with tighter tolerance called out separately. For urgent breakdowns, WhatsApp support can confirm feasibility and rough lead time before the formal file upload.
- DXF (2D flat parts) or STEP (3D and machined parts), not a PDF drawing alone
- Material grade and thickness, using EN or common designation (S235JR, 304, 6061)
- Quantity and whether this is a one-off repair or a recurring spare part
- Finish required: raw, powder coated with RAL, or galvanised
- Zone and factory access notes if delivery needs a gate pass or specific time window
- Photo of the broken or worn part for urgent like-for-like replacements
Design tips
- For recurring spares, keep a saved DXF/STEP file with a part number so re-ordering skips redrawing
- Specify hole tolerance separately from profile tolerance; laser profile holds ±0.1 mm, matching bores may need reaming
- Call out galvanised sheet as DX51D+Z with the zinc coating weight (Z275 is common) to avoid ambiguity
- For food-grade parts, specify 1.4404 (316L) and note if a mirror or brushed finish (Ra below 0.8 µm) is required
- Batch identical brackets in one DXF file to reduce nesting waste and cutting time
- Note bolt hole diameters and edge distances so the same jig fits the existing machine after replacement
Applications
| Industry | Example parts | Typical material |
|---|---|---|
| Food processing | Hoppers, chutes, guide rails | 1.4301 (304) |
| Pharmaceutical | Cart frames, enclosure panels | 1.4404 (316L), S235JR |
| Plastics and packaging | Machine frames, sprockets, shafts | S235JR, 6061-T6 |
| Textile | Guide rollers, brackets, guards | S235JR, DX51D+Z |
| Automotive supply | Jigs, fixtures, machined brackets | S235JR, 6061-T6 |
| Warehousing and logistics | Racking brackets, conveyor parts | S235JR, DX51D+Z |
Pricing and lead time
Price for parts destined to 10th of Ramadan City depends on material and thickness, cutting or machining complexity, and finish; a raw laser-cut S235JR bracket is the cheapest baseline, stainless roughly 30-40% more than the same part in mild steel, and any powder coating or galvanising adds a fixed processing charge independent of part size. Cutting and bending typically completes in 2-5 working days, with an extra 2-4 working days for powder coating in a stocked colour or 3-5 days for galvanising. Delivery from a Cairo or 6th of October workshop to the A zones is next working day and to B and C zones 1-2 working days by pallet or courier; urgent single parts can be arranged same day with a confirmed file and WhatsApp coordination on [local phone].
Frequently asked questions
Yes, courier and pallet delivery covers all zones (A1-A6, B1-B4, C). Provide the factory name, zone and any gate access requirement when placing the order so the driver is cleared in advance.
Upload your DXF or STEP file and receive a binding quote for delivery to 10th of Ramadan City within 12 hours.