05 · TURNING
Turning
Precision CNC turning for shafts, bushings, pins and round parts, held to tight tolerances.
| Diameter | Ø3 to 200 mm |
|---|---|
| Length | to 500 mm |
| Tolerance | ±0.02 mm |
| Lead | from 5 days |
What we make
Real parts, freshly made.
Drive shaft4140 · Ø30 BushingBrass · Ø20 Threaded pin304 SS · M8 Spacer set6061 Al · Ø12
Materials & thicknesses
Materials we run.
| Grade | Range | Finishes |
|---|---|---|
| Steel 4140/1045 | Ø3 to 200 mm | Black oxide |
| Stainless 304/316 | Ø3 to 150 mm | Polish |
| Brass / aluminium | Ø3 to 150 mm | As-machined |
Capabilities & tolerances
What the process holds.
- CNC lathes with live tooling
- Threads, knurls, grooves
- Tolerances to ±0.02 mm
- Batch sizes 1 to 10,000
- Ra 0.8 surface finish available
How pricing works
What drives your price.
Your quote is built from a few clear drivers. No hidden fees, no minimums.
- Material
- Diameter & length
- Features
- Tolerance
- Quantity
Process DFM tips
DFM- Aspect ratio OKLength under 8× diameter turns without support.
- Deep grooveGrooves deeper than half the diameter slow cycle time.
- Thin wall sectionWalls under 1 mm on turned parts risk chatter.
Quality
Checked before it ships.
Turned parts get automated diameter and runout verification, with a digital QC certificate.
QC certificate
Verified- Ø30.00 · tol ±0.02 Pass
- Runout · 0.01 TIR Pass
- Thread · M8 go/no-go Pass
Frequently asked questions
Yes, cross-holes, flats and milled features in one setup.